Due to the placement of the transformer in the Up 6 ceiling speaker, extra care must be taken to hang the loudspeaker straight when using the Pendant 2 accessory kit.
- Install the Up 6 into the Pendant 2 housing, aligning the safety loop on the back can with the hanging flange of the Pendant 2 (see also Up - Pendant Accessories).
- Once installed, you can verify that the Up 6 is in the correct orientation by checking that the driver is orientated in line with the pendant hanging flange as per the image below.
- Suspend the Pendant 2 from the first pickup location on the driver side of the Up 6.