All models in the Up range are supplied with support rails designed to fit 600mm standard ceiling tiles. The following images clearly show the installation procedure step-by-step.
A tile cutout template and a paint shield for each Up model is included. Be sure to cut your holes in the correct tiles before fixing the ceiling speakers!
- Lay the support rails across the ceiling tile mounting system
- Place the C Ring in between the support rails as shown
- Align the C Ring with the hold cut in the tile and secure
- Ensure the locking tabs are in the open position before mounting the loudspeaker
- Insert the speaker into the ceiling tile
- Carefully tighten the locking tabs using a suitable Philips screwdriver until they are tight. Do not over tighten
- IMPORTANT! Ensure the correct transformer tap is selected
- Check the speaker is secure. Once you have tested the system and satisfied yourself it is working correctly and the loudspeaker tapping is correct, fit the supplied loudspeaker grille.