All Up loudspeakers are fitted with 4 pin Euroblock connectors. The terminals are wired as follows:
Pin 1: Negative In
Pin 2: Negative link through
Pin 3: Positive In
Pin 4: Positive link through
To connect the cable to the loudspeaker terminals follow this procedure.
- Undo the two screws that secure the protective plate on the top of the back can
- Slide the plate sideways and lift off
- Pass the cable(s) through the cable grip. Connect to the Euroblock terminals as detailed above.
- Replace the plate by reversing the procedure
When wiring loudspeaker cables be careful to observe the correct polarity of the cable and connector at both ends.