Mounting Cuboid 3, 3TX, 5, 5TX, 6 and 6TX in any orientation is easy thanks to the universal bracket that is supplied with the loudspeaker.
The wall bracket is fixed to the mounting position by 4 screws, as shown.
Once the wall mounting part is fixed, attach the loudspeaker part of the bracket to the mounting points on the back of the Cuboid 3, 3TX, 5, 5TX, 6 or 6TX.
It is critical that the structure to which Cuboid is to be mounted to is suitable for taking the weight of the loudspeaker/bracket assembly. It is highly recommended that a secondary safety fixing be fitted.
The orientation of the loudspeaker fixing plate can be pre-set and tightened using the supplied 4mm hex wrench. Use the supplied 3mm hex wrench to fix the loudspeaker to the bracket.
Attach the loudspeaker and bracket assembly to the wall mount and tighten in the desired orientation.