The system status page enables you to view the status of various key functions that WebApp monitors through the use of coloured lights. This page will display different information depending on if you are operating a Zone 4/8 or a powered Zone 4P/8P.
For Zone 4 and Zone 8, System Status will display Alarm Mute status (on or off), Memory Usage and current System Temperature.
For powered Zone 4P and Zone 8P models, System Status will display more detailed information relating to hardware elements found only on powered Zone controllers. Such as, fan speed, PSU status and amplifier status. Should any faults or errors occur they will be displayed in this section of WebApp as well as being logged within the unit's log files.
On all models of Zone controller, the current WebApp firmware version is displayed at the bottom of the System Status section.
To access the System Status information navigate to - Settings > System > Status
System
| Status | Indicator | Description |
| Alarm Mute | Off | Default status. The system is operating normally |
| Yellow • | Alarm mute active. Outputs muted. | |
| Power Supply (Zone 4P/8P only) | Off | Default status. The system is operating normally |
| Red • | Fault detected. Attempt power cycle. If issue persistent, contact support. | |
| Fan Status (Zone 4P/8P only) | Red • | Fault, the fan has stalled. Attempt power cycle. If issue persistent, contact support. |
| Green • | Fan is operating at the correct speed. The speed is shown in RPM, ranging from 1000 rpm - 4000 rpm depending on the temperature of the unit. |
Memory Usage
Provides an indication of the memory status of the Zone Unit.
The amount of free memory available is dependent on the number of WebApp clients connected to the Zone unit. A maximum of sixteen clients connected at the same time is supported. It is recommended to maintain the total number of clients connected and delete any that are no longer in use.
If for any reason there is a problem with amount of memory in use, the indicator will show red and an error will be added to the application log file.
The indicator refers to operating system memory.
Green • = the system is operating normally. Red • = error reported to log file.
Amplifiers (Zone 4P and 8P only)
| Status | Indicator | Description |
| Clip | Off | The system is operating normally. |
| Red • | Individual amplifier channels red when amplifier is clipping. | |
| Overload | Off | The system is operating normally. |
| Red • | There is an overload of the amplifier power supply. | |
| Temperature | Off | The system is operating normally. |
| Red • | The system temperature is too hot. Power down and ensure filters are clean and Zone is well ventilated. | |
| DC Fault | Off | The system is operating normally. |
| Red • | Power supply fault on one or both channels of a pair. Contact support. |