Note - Do not plug ZonePad into Zone when the power is on
Use with Zone 4 and Zone 4P
ZonePad 4 is connected to the Zone via CAT 5/6 cable. On the rear of Zone 4 and Zone 4P you will find four RJ45 connections labelled 'Wall Controller Inputs', and below they are numbered 1,2,3,4.
ZonePad 4 can control the selected source and volume for four zones. If you are using ZonePad 4 with Zone 4 or Zone 4P, connect to any of the Wall Controller Inputs and you will have control over all zones of your System.
Use with Zone 8 and Zone 8P
ZonePad 4 with Zone 8 or Zone 8P is slightly different. Connecting ZonePad 4 to any of the Wall Controller Inputs number 1 - 4 will give control over system zones that are allocated as zones 1 - 4 in WebApp.
Connecting ZonePad 4 to any of the Wall Controller Inputs number 5 - 8 will give control over system zones that are allocated as zones 5 - 8 in WebApp.
Note: It is not possible to control zones 5 - 8 from a ZonePad 4 connected to Wall Controller Inputs 1 - 4.