Zones
A zone will be an area of a building that requires a chosen music source, microphone and associated levels. A single zone may use one or more physical outputs on the Zone processor as required for different loudspeaker types used within that zone.
In the zones section, you're presented with level controls and music source selection for the currently selected zone. The zones are listed on the left according to whether you have a Zone 4, 4P or Zone 8 or 8P unit. At this point it is useful to name your zones.
To do this, follow these steps:
- On the landing page, select Settings.
- Under Audio, select Zones.
- Select the relevant zone from the list.
- Type the name into the box.
Sources connected locally via a ZonePad 1 are also named here. Click the box named Local Source Name and enter a name for your source.
Sources
Music sources can be named in a similar fashion. Access this page via Settings>Audio>Music Sources. If an active source is already connected it will register on the green meter above the name bar. Again, name your sources now to maintain clarity.
The same process applies to any microphones connected directly to the Zone processor. Access this page via Settings>Audio>Microphones. Again, name your microphones to maintain clarity.